products categories
tory has a strong r&d team that continuously developing new products to keep up with the international market and working to improve our current offerings.
  • Glass Beads for Road marking

    Glass Beads for Road marking

    The reflective glass beads are designed for night day to have good retro reflective for drivers. Glass beads are used alone or intermix in paints and coatings. Glass beads looks like powder, made by soda lime glass.
    The reflective road marking glass beads is able to improve the reflective performance of road marking line. The glass beads will reflect the lights back, make the driver see the directions clearly at night, and improve the driving safety.

    TORY HR reflective glass beads is manufactured by horizontal furnace with melting virgin glass at high temperature, the roundnes is higher, the beads is more clear and transparent, it will brings higher retroreflectivity for road marking line, normally it can reach at least 500mcd, or even above 600mcd. The refractive index is 1.5-1.64, the size range is between 100 ~ 1400 microns in diameter.

  • AW Element

    AW Element

    AW reflective element is mainly for wet night condition,reasonable optical design provides superior retroreflectivity for road marking line, element combined by a core bead and hundreds of non-transparent high refractive index micron beads.
  • Water based Reflective Paint

    Water based Reflective Paint

    Reflective paint is water based paint for road signal and traffic safety signs, provides 180 degree reflection, apply for concrete, asphalt, metal or wooden substrates.
  • MMA Resin

    MMA Resin

    For 2 Component Methyl Methacrylate road marking paint or colored pavement paint, or bridge deck waterproofing.
  • Other Glass Beads

    Other Glass Beads

    Glass beads in irregular shape and bright in color, supply water blue, dark blue, light blue, cobalt blue, aqua, amber, green, yellow and iridescent color, apply for swimming pool, gardening decorative. Filling glass beads for stuffing in weighted blanket or filter application..
about tory
anhui tory materials technology inc. is a specialty manufacturer of traffic safety materials.
Anhui Tory Material Technology Inc. is a specialist manufacturer of traffic safety materials. We focus on research, development and production, only to provide high quality products, factory is loacted in High-Tech zones of Bengbu city, covers an area of 7.2 Acre, and the workshop is 18000 square meters. Currently we have two brands: SINOVIGO®  for Organic Materials like MMA resin, reflective vertical object marking paint (liquid reflective film).  TORY® for Inorganic Materials like glass beads, anti-slip reflective aggregates. Tory has a strong R&D team continuously to improve current products, and develop new products to always keep up with international market. We have developed new traffic safety products according to different country’s road and temperature conditions, for instance the rain night reflective glass beads (AW element), reflective vertical object marking paint (liquid reflective film), and self-luminous reflective glass beads, are the first in China. Most of these products were applied in China, Southeast Asia, furthermore, we extended our products to various spec. and color of glass beads to meet customer’s requirement, now we already exported to Austrialia, Malaysia, Korea and Southeast Asia etc.
view more
20
years experience
18000
square meters workshop
7
factory covers an acre
Our Laboratory
TORY is dedicated to researching road marking materials with higher reflectivity and superior performance, constantly innovating and improving to provide cost-effective solutions for customer.
Our Laboratory
Our Laboratory1
our applications
tory has a strong r&d team that continuously developing new products to keep up with the international market and working to improve our current offerings.
Glass Beads for Road Marking and Machine Vision in Automatic Driving Technology

Glass Beads for Road Marking and Machine Vision in Automatic Driving Technology

Glass Beads for Road Marking and Machine Vision in Automatic Driving Technology Glass beads are commonly used in road marking to enhance visibility and retroreflectivity of the markings, particularly in low-light conditions. These beads are embedded in the paint or thermoplastic material used for road markings, and reflect light back towards the source, making the markings more visible to drivers. Some people wonder whether automatic driving technology will eliminate road markings. At present, the answer is no. In the context of machine vision in automatic driving technology, the retroreflective properties of glass beads can also be useful for helping automatic vehicles navigate roadways. Specifically, the reflective properties of the glass beads can help sensors on the vehicle detect and identify the location and boundaries of the road markings. This information can be used to help the vehicle stay centered in its lane and navigate safely and accurately. To make the most of the retroreflective  properties of glass beads in automatic driving, it is important to carefully select the type and quality of glass beads used in road marking. Factors such as the size, shape, and refractive index of the beads can all affect their retroreflective properties and the accuracy of the information they provide to sensors on automatic vehicles. Overall, glass beads used in road marking can be an important tool for improving safety and visibility on roadways, and can also be useful for machine vision in automatic driving technology. By carefully selecting and using high-quality glass beads, it is possible to enhance the effectiveness of road markings and improve the accuracy and safety of automatic vehicles. If you need high-quality and competitive glass beads for road marking paint, MMA resin for cold plastic and technical support, please click the link below to learn more details. https://www.cntory.com/products
Is Two-Component Road Marking Paint More Economical Than Hot-Melt Paint in Long Term?

Is Two-Component Road Marking Paint More Economical Than Hot-Melt Paint in Long Term?

Is Two-Component Road Marking Paint More Economical Than Hot-Melt Paint in Long Term? Generally speaking, two-component road marking paint is considered to be more durable than hot melt road marking paint, which can provide long-term economic benefits. Two-component road marking paints are typically made by MMA resin and a hardening agent that are mixed together before application. This forms a hard and wear-resistant coating that can withstand high traffic volumes and bad weather. However, two-component road marking paint is more expensive to buy and use than the hot-melt paint. The application process for two-component road marking paints requires specialized equipment and experienced operators, which will increase the cost. Additionally, two-component road marking paints require longer curing times than hot melt road marking paints, which can result in traffic jam and decreased productivity. In conclusion, the economic advantage of two-component road marking paints over hot melt road marking paints will depend on the specific needs and requirements of the road or projects. It's important to consider factors such as traffic volume, climate, and maintenance requirements when determining the most cost-effective road marking solution. We are a professional manufacturer of reflective glass beads and MMA resin for road marking paint, and we can provide you with highly competitive products and technical support if you need it . Please click on the link to view.
Prevention of marking lines cracking

Prevention of marking lines cracking

Prevention of marking lines cracking To prevent the road markings line get cracked, except choosing the qualified raw materials and proper preparation of the road surfaces. The application under favorable conditions is required, the following precautions should be taken when construct with thermoplastic paint. 1. Put the paint into the reaction kettle to heat up. The temperature should be increased step by step. Stir while heating, and do not heat it violently, which may cause cracking due tolocalpartial overheating. 2. Stirring for a sufficient time, wait until the temperature of the upper and lower layers is consistent, and the materials are completely mixed evenly before starting to draw the line. 3. Try to draw the lines at a time with small temperature difference between air and ground. If in summer, the ground temperature is the highest at noon and should be avoided, the suggested time is from 6:00 am to 10:00 am and 4:00 pm to 7:00 pm Tory produces reflective glass beads, the high-quality glass beads for thermoplastic road marking paint, and we can provide the technical support on paint and construction. Please learn more about our products through the link below. https://www.cntory.com/contact-us_d2
How to maintain the road markings

How to maintain the road markings

How to maintain the road markings To maintain the retroreflective performance of road markings, regular maintenance and upkeep are necessary. Here are some steps that can be taken to maintain the road markings: 1.Cleaning: Regular cleaning of road markings can help to remove dirt, dust, oil and other contaminants that can builded up on the surface of the road markings and reduce its retroreflective performance. A pressure washer or a cleaning solution specifically designed for road markings can be used to clean the road markings. 2.Reapplication of retro-reflective glass beads: The retro-reflective glass beads used in road markings can be get off over time, which will reduce the retroreflective performance of the markings. To restore the retroreflective performance, retro-reflective glass beads can be reapplied to the surface of the road markings. 3.Repair of damaged road markings: Damaged road markings, such as cracks and gaps, can reduce the retroreflective performance of the road markings. Repairing damaged markings, such as filling in cracks and gaps, can help to restore the retroreflective performance of the markings. 4.Regular inspection: Regular inspections of road markings can help to identify any areas of the markings that need to be cleaned, repaired, or have reflective glass beads reapplied. This can help to maintain the retroreflective performance of the road markings over time. 5.Use of high-quality materials: Using high-quality road marking materials and retain its retroreflective performance can help to ensure that the road markings maintain the retroreflective performance over time. It's important to note that the frequency of maintenance and upkeep will depend on several factors, such as the location of the road markings, the traffic flow, and the local climate. To ensure that road markings maintain its retroreflective performance over time, it is recommended to follow a regular maintenance schedule and solve any issues with the markings promptly. If you need to re-spraying glass beads, you can refer to the products in this link: https://www.cntory.com/glass-beads-for-road-marking_c1 In this page you can find Tory HR glass beads, which have wide distribution range of sizes from 100um to 5000um, stable refractive index, and low content of heavy metals. Applying it to road marking construction helps to improve the properties.
Patent Certificate
tory has a strong r&d team that continuously developing new products to keep up with the international market and working to improve our current offerings.
view more
Glass beads polishing
Reflective aggregates
MMA Resin
Glass beads dispenser
Irregular glass beads
latest news
  • Mar 15, 2024

    Intertraffic Amsterdam 2024 Is Incoming!

    We are honored to announce that we will participate in the Intertraffic Amsterdam 2024 . This exhibition will be held from April 16 to 19, 2024. We look forward to sharing this event with every elite, professional and potential partner around the world. We will showcase our latest research and development results at this exhibition, including a series of high-performance, environmentally friendly traffic safety materials. Our products are widely used in many fields such as road markings, traffic facilities, and safety protection, aiming to improve road safety, reduce traffic accidents, and protect people's lives. We know that the safety of transportation infrastructure plays a vital role in the stability and development of society. Therefore, we always adhere to technological innovation as the core, continue to develop more advanced and reliable traffic safety materials, and contribute to global road safety. We look forward to having in-depth exchanges and cooperation with colleagues  from around the world at this exhibition to jointly discuss and solve challenges and issues in the field of road infrastructure safety. At the same time, we also look forward to taking this opportunity to showcase our professional strength and innovative achievements in the field of traffic safety materials to the world. Please look forward to our wonderful performance at the exhibition. We also welcome friends from all over the world to visit, communicate and jointly create a better future.
    view more
  • Mar 06, 2024

    ATSSA's Convention & TRAFFIC EXPO USA 2024

    ATSSA's Convention & TRAFFIC EXPO USA 2024 Recently, Tory successfully participated in the 2024 American Road Traffic Show (ATSSA) held at the San Diego Convention Center in California, USA. In this exhibition, we displayed the latest research and development of traffic safety materials, including high-performance glass beads, environmentally friendly traffic facilities materials and a series of innovative products. These products, with their excellent performance and environmental protection characteristics, have attracted the attention and consultation of many visitors. Many industry experts and potential customers have expressed strong interest in our products and have conducted in-depth exchanges and discussions with us. During the exhibition, we also actively visited the booths of other exhibitors and learned their advanced technology and experience in the field of traffic safety materials. These advanced technologies and experiences provide new ideas and directions for our research and development work, and help us to continuously improve the performance and quality of our products to meet the diverse needs of the global market. By participating in this US Road Traffic exhibition, Tory not only showcase the company's innovative products and technical strength, but also gain an in-depth understanding of the global market needs and trends. This provides an important reference for our company's future development and strategic planning. Looking ahead, Tory will continue to increase investment in research and development, continue to innovate products and technologies, and make greater contributions to global road traffic safety. At the same time, Tory will also actively participate in various international exhibitions and exchange activities, and maintain close cooperation with the global industry elites to jointly promote the development of traffic safety materials.
    view more
view more
leave a message
welcome to cntory
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact